HIH6121-021-001

Honeywell

Humidity/Temperature Sensor Digital Serial (I2C) 4-Pin SIP T/R Honeywell HumidIcon™ Digital Humidity/Temperature Sensors: HIH-6120/6121 Series, I2C, ±5 %RH total error band, SIP4, 1.27mm SENSOR, HUMIDITY/TEMPERATURE, DIGITAL, SIP-4; Humidity Sensor Type:Capacitive; Accuracy:± 4% RH; Humidity Range:10% to 90% RH; Supply Voltage:3.3VDC; Sensor Case Style:SIP; No. of Pins:4; Response Time:6s; Supply Current:650µA SENSOR, HUMIDITY, FILTERED; Sensing Accuracy:4%; Humidity Range:10% to 90%; Sensor Output1:Digital (I2C); Sensor Terminals:Through Hole; Response Time:6s; Supply Voltage Min:2.3V DC; Supply Voltage Max:5.5V DC; Operating Temperature Min:-25°C; Operating Temperature Max:85°C; MSL:MSL 1 - Unlimited; SVHC:No SVHC (18-Jun-2012); Operating Temperature Range:-25°C to +85°C; Sensor Supply Voltage:2.3V DC to 5.5V DC Honeywell HumidIcon™ Digital Humidity/Temperature Sensors: HIH6120/6121 Series is a digital output-type relative humidity (RH) and temperature sensor combined in the same package. These devices offer several competitive advantages, including: Industry-leading long-term stability Industry-leading Total Error Band Industry-leading reliability Lowest total cost solution True temperature-compensated digital I2C output Energy efficiency Ultra-small package Industry-leading long term stability (1.2 %RH over five years) Competitive humidity sensors need to go through a 12 hour at 75 %RH rehydration process (which requires special equipment chambers) to correct reflow temperature offset. The Honeywell sensor also experiences an offset after reflow; however, it only requires a five hour rehydration under ambient conditions (>50 %RH). The industry-leading Honeywell long-term stability provides the following benefits to the customer: Minimizes system performance issues Helps support system uptime by eliminating the need to service or replace the sensor during its application life Eliminates the need to regularly recalibrate the sensor in their application, which can be inconvenient and costly Industry-leading Total Error Band (TEB) (±5 %RH) Honeywell specifies Total Error Band – the most comprehensive, clear, and meaningful measurement – that provides the sensor's true accuracy of ±5 %RH over a compensated range of 5 °C to 50 °C [41 °F to 122 °F] and 10 %RH to 90 %RH. TEB includes all errors due to: Humidity non-linearity Humidity hysteresis Humidity non-repeatability Thermal effect on zero Thermal effect on span Thermal hysteresis Industry-leading reliability The new Honeywell HIH6120/6121 Series sensors use a laser trimmed, thermoset polymer capacitive sensing element. The element's multilayer construction provides resistance to most application hazards such as condensation, dust, dirt, oils, and common environmental chemicals, which helps provide industry-leading stability and reliability. Lowest total cost solution Offe