PCA9550TK Datasheet, PDF
- Reference price Can ship immediately
- TI remarks How much is PCA9550TK here? The last 7 days of 2023, today's bidding, today's bidding, PCA9550TK wholesale/procurement quotation,PCA9550TK market trend sales ranking, PCA9550TK quotation.
PCA9550TK Alternate Parts
PCA9550TK Part Attribute
- Description OverviewThe PCA9550 LED blinker blinks LEDs in I²C-bus and SMBus applications where it is necessary to limit bus traffic or free up the I²C master's (MCU, MPU, DSP, chip set, etc.) timer. The uniqueness of this device is the internal oscillator with two programmable blink rates. To blink LEDs using normal I/O expanders like the PCF8574 or PCA9554, the bus master must send repeated commands to turn the LED on and off. This greatly increases the amount of traffic on the I²C-bus and uses up one of the master's timers. The PCA9550 LED blinker instead requires only the initial set-up command to program BLINK RATE 1 and BLINK RATE 2 (i.e., the frequency and duty cycle). From then on, only one command from the bus master is required to turn each individual open-drain output ON, OFF, or to cycle at BLINK RATE 1 or BLINK RATE 2. Maximum output sink current is 25 mA per bit and 50 mA per package. Any bits not used for controlling the LEDs can be used for General Purpose parallel Input/Output (GPIO) expansion. The active LOW hardware reset pin (RESET) and Power-On Reset (POR) initializes the registers to their default state, all zeroes, causing the bits to be set HIGH (LED off). One hardware address pin on the PCA9550 allows two devices to operate on the same bus.
- Part No. PCA9550TK
- Manufacturer 恩智浦-NXP
PCA9550TK Suppliers
No Date