SN54ABT574 Datasheet, PDF
- Reference price Can ship immediately
- TI remarks How much is SN54ABT574 here? The last 7 days of 2023, today's bidding, today's bidding, SN54ABT574 wholesale/procurement quotation,SN54ABT574 market trend sales ranking, SN54ABT574 quotation.
SN54ABT574 Alternate Parts
SN54ABT574 Part Attribute
- Description These 8-bit flip-flops feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. The eight flip-flops of the SN54ABT574 and SN74ABT574A are edge-triggered D-type flip-flops. On the positive transition of the clock (CLK) input, the Q outputs are set to the logic levels set up at the data (D) inputs. A buffered output-enable (OE)\ input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without need for interface or pullup components. OE\ does not affect the internal operations of the flip-flops. Old data can be retained or new data can be entered while the outputs are in the high-impedance state. To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.
- Part No. SN54ABT574
- Manufacturer 德州仪器-TI
SN54ABT574 Suppliers
No Date