MAX5270B Datasheet, PDF
- Reference price Can ship immediately
- TI remarks How much is MAX5270B here? The last 7 days of 2023, today's bidding, today's bidding, MAX5270B wholesale/procurement quotation,MAX5270B market trend sales ranking, MAX5270B quotation.
MAX5270B Alternate Parts
MAX5270B Part Attribute
- Description The MAX5270 contains eight 13-bit, voltage-output digital-to-analog converters (DACs). On-chip precision output amplifiers provide the voltage outputs. The device operates from +12V/-12V supplies. Its output voltage swing ranges from 0V to +8.192V and is achieved with no external components. The MAX5270 has three pairs of differential reference inputs; two of these pairs are connected to two DACs each, and a third pair is connected to four DACs. The references are independently controlled, providing different full-scale output voltages to the respective DACs. The MAX5270 operates within the following voltage ranges: VDD = +11.4V to +12.6V, VSS = -11.4V to -12.6V, and VCC = +4.75V to +5.25V. The MAX5270 features double-buffered interface logic with a 13-bit parallel data bus. Each DAC has an input latch and a DAC latch. Data in the DAC latch sets the output voltage. The eight input latches are addressed with three address lines. Data is loaded to the input latch with a single write instruction. An asynchronous load input (active-low LD) transfers data from the input latch to the DAC latch. The active-low LD input controls all DACs; therefore, all DACs can be updated simultaneously by asserting the LD-bar pin. An asynchronous active-low CLR input sets the output of all eight DACs to the respective DUTGND input of the op amp. Note that active-low CLR is a CMOS input, which is powered by VDD. All other logic inputs are TTL/CMOS compatible. The "A" grade of the MAX5270 has a maximum INL of ±2LSBs, while the "B" grade has a maximum INL of ±4LSBs. Both grades are available in 44-pin MQFP packages.
- Part No. MAX5270B
- Manufacturer 亚德诺-ADI
MAX5270B Suppliers
No Date